THE WORKSHOP – Le’ skateboard – by Goatbot/Simon

Once again, Simon/Goatbot/Goatballs/Goaty is back with another not-for-the-weak-knee’d tutorial. This time he’s going to walk us through his process of making his own custom skateboards for 1\6 figs. 

Enjoy!

– Knives

Le’ Skateboard tutorial:
Alright then… first off, I just have to say that I’m doing this because those slack bastards at threeA have refused to heed my repeated demands for some street transport for their figs. I couldn’t be arsed to wait for the Adventure Kartel Zomb zimmer frame and decided to make a skateboard or three in the meantime. Also, big props to much missed threeA forum boardie Dante for the OG suggestion.
Down to business…
The materials you’ll need..
  • super glue (or crazy glue to the colonials )
  • stock card (old cereal packets, birthday cards are ideal )
  • exacto knife and sharp scissors
  • steel rule 
  • cutting mat
Skateboards are a very personal affair and first ye’ ve got to decide what style ride ye want… old school, street or a long board.
Once ye’ve picked yer poison ye’ll have to create a template. I do all mine by eye alone… ye computer whizzes should be able to knock something out in no time though!
Ideally it should be a rectangle roughly 14 cm x 3cms. Once you’ve that measured out, take a pencil and draw a line bisecting the rectangle. Then draw or trace yer shape out. Once yer happy cut it out, rounding out any imperfections. Then simply use the template you’ve just created to draw out 4 – 6 more “boards” depending on how thick the card is and how thick ye want yer deck.
 
I find 4 layers of average greeting card stock will do the job nicely .
O.K… taking care not to glue yourself together, carefully glue the layers of card together one at a time. Ye can add kicks at this stage by simply bending the card where ye want em..
I find drawing around the edge of the board then a few lines in the middle will do. After each layer take care to trim any excess off and round out any imperfections. Rinse and repeat until ye are satisfied with the shape and thickness.
 
Apply more glue (ye may need to open a window unless ye dig cheap highs..) around the edge of the board to make sure the layers are firmly in place. This will also create a hardened edge that ye can lightly sand to add shaping.
After that its time for the grip tape. I use any old sheets of sandpaper or aluminium oxide cloth paper about 80 – 120 grit. Take what you have,  glue it to the board and trim to fit !
Apply glue once more around the edge of the board… once again, sand and clean up any last irregularities.
Now its simply a matter of adding any designs ye want. You can print off graphics and decals from yer computer or just doodle with a brush or pen. This is for me the most fun part of it all… I’ve gone for a homage or two  to the first board I ever rode.. my big bro’s dog town board. No doubt a few of ye will have similar nostalgia in mind .
Once yer happy with the graphics its time for some wheels. Silly enough, there’s not many decently sized trucks and wheels about. I find Tech Deck (TM) ones too small but you can lengthend them a bit with appropriately sized plastic tubing and the wheels glued in place on the end.
The trucks I have are old ones from a Dragon “In Dreams” skate fig, which are ideal at 3cm wide.. ye can either glue them straight on or mark  the bolt holes and drill them out with a pin drill or dremel to retain the spin.
Hopefully this will inspire a few of ye out there. I’d love to see some pics of a few finished decks at some point.
If any one out there happens upon a company thats producing some decent  1/6 sized trucks hit us up, my zombs would appreciate it!
Many thanks!

We hope you enjoyed the Workshop. Big thanks to Simon for taking time away from making amazing customs to write/photograph this up for us!

We’d love to hear from you and check out what kind of customs your working on! Hit us up on Facebook or Twitter pages to stay updated and please let us know what kind of workshops you’d like to see.

Until next time!


THE WORKSHOP – Wee Zombie Bashing Bat – by Goatbot/Simon

Happy Valentine’s Day everyone! If you’re lonely and sad today.. take heart! A new Workshop awaits!

What a treat today is… A little back history first. When I first got into collecting 3A, I remember seeing all these pictures of Tommy Mission figures holding these awesome little baseball bats. They all had different decals, witty scribe.. some had blood splatters, nicks/scratches etc. I ordered my first Tommy fully expecting to have some variant packed in with him. To my surprise, no bat.. just a dumb glowing hand (kidding?). After a smidge of digging I came to learn that these amazing little things were handmade by a fellah who, going completely off his various forum names, seems to have an intense, yet healthy fascination with goats.

Huge thank you to Simon/Goatbot/Goatballs/Goaty for this fantastic workshop! He was kind enough to create not just one, but TWO different tutorials for us! The second we plan to post later in the week. This one is the most complex yet and you get play to play with power tools. Please be safe and don’t poke your eye out kid!

– Knives

Howdy folks, must be a slow news week as Knives has very kindly asked me to provide him with a tutorial or two… you lucky people .. its a big honor to have been asked  so thanks mush.
To the bat tutorial then..
For those of you who feel the need for some blunt force trauma in your lives, nothing says emo better than 3 foot of hickory planted firmly in the jacobs…  hopefully this tutorial will make enough sense so ye can make your very own baseball bat…
This is a wee bit more demanding and requires you have a few tools laying about but if you can do it, anything goes.
Materials :
  • power drill, cordless preferred unless ye have a bench vice or indeed a wood lathe (I use an 18v hitachi cordless impact driver drill)
  • fine toothed saw ( gents,  mitre etc )
  • wood rasp
  • small hobby files or a dremel
  • sandpaper or better still aluminium oxide cloth 80 , 120, 240 grit should do it
  •  12 mm HARDWOOD doweling , available in most hardware stores and model hobby shops. Ye can use lengths of twig, sticks etc but this will make th job way harder..
  • electrical tape, medical tape etc ( for the grip )
  • paint, pens, decals
  • bees wax or spray varnish
  • COMMON SENSE
  • dust mask
  • Well ventilated work space
Okay this my method only ! Those of ye with better tools and workspaces will no doubt adapt accordingly, I apologize for the picture quality as it was cold and no one was willing to take pics of me making toy bats… bastards..
Also a shout out to dedguy for inspiration and for making bats look so frick’n cool
To start off with I find it best to sit on a wee box or something low to the floor with materials and tools close to hand. Then I measure and cut how many bats I want to make..the bat should be around 13.5 – 14 cms but the over all length ye want to work with should be about 17 cm.. The  remainder should be enough to fit snugly into the chuck  of the drill . Bats come in all shapes and sizes so decide on the look ye want before hand. I make bats of differing styles and also of differing handle widths to accommodate various hand sculpts. Note its better to go too thin as ye can always  bulk out the handle with “grip tape”.  After inserting the wood into the chuck, engage the power to see how well the woods been seated… if its off it will wobble alarmingly.. just re-house it until it spins  ” true” .
I then put the drill on the floor and brace it with a well planted foot across the battery housing ( as per the picture above) when its stable, select th speed ye require ( higher speeds work best) and away ye go .
With one hand operating th drill trigger I use the wood rasp to waste away the rough shape of the bat. I work on the opposite side of the wood to where I’m positioned taking care not to impose too much pressure on the wood..
Working your way from the chuck to the end of teh bat will have the best results but be wary of lingering too long in one spot lest ye thin it out too much.
I work my way up from the chuck end along th  barrel of the  bat a couple of times then stop to see how I’m doing… if I’m satisfied I’ll take a sheet of abrasive paper 80 – 120 grit, fire up the drill again and use th paper to smooth and shape teh bat to the required shape and finish.
BE CAREFUL HERE .. you can grip th bat with the paper but be aware that it can snap if your grips too tight, also the transferred heat  can cause nasty friction burns to you if yer not careful… try explaining that to your girl friend or nearest medical professional.
I usually leave the grip end until last as this reduces th likelihood of it snapping at the weakest point. I use a wee elliptical metal file to flare out the bottom of the handle and to create the hand stop at the end taking care to thin out the wood below the knob so as to make cutting off the wood sprue neater and easier.
 
Once yer satisfied ye can take the bat out, cut it off at the base and sand the base and top of the bat by hand .. If I’ve done this properly ye should now  be teh proud owner of a 1/6 scale  baseball bat !
or have a fine  toothpick…
or maybe  a burnt hand full of splinters.
Once yer done with this part its then up to you on finishing touches. I usually polish the wood with beeswax, paint it if required, then add weathering and teh odd nick or scratch before a final coat of varnish .
Your AK crew is now tooled up and ready to roam the streets..or your shelves, doling out righteous woody justice !
Thats it …done and dusted.
Many thanks for your time and patience and a huge props to Rad Toy Review.
cheers !

We hope you enjoyed this Workshop. Check back later in the week as we bring you another from the mighty Goat!

We’d love to hear from you here, on our Facebook or Twitter page. We’d love for you to share with us your own customs. Let us know how we’re doing and what kind of workshops you’d like to see.


3AA Details revealed

You can see the whole thing here if you like..

The highlights for those with lazy fingers… and I quote.

3AA 2012 goes onsale 13th Jan at 9-00am, the sale will last 24 hours and the opportunity to join 3AA will not come around till the same time next year!

3AA 2012 costs $180USD, the member pack consists of 15% discount to any product purchased directly from 3A via Bambaland or conventions etc for the period of 12 months ( under the account name the 3AA 2012 was purchased ), 3AA messenger bag, 3AA baseball cap ( regular size ), membership card and the exclusive Adventure Kartel 1/6th figure F-LEGION.

Zang! $180 is higher than last year, which was $150. But come on! That price isn’t too shabby for an awesome looking 1/6 fig, swaggah and a year of 15% off bamba purchases! Plus if you’re already in 3AA, you even get 15% off the price of renewing your membership.. $153. Boom!Practically the price of last years.

One thing I noticed was in the detailed info about the difference between 3AA and standard sales.  3AA exclusive figs have been a thing for awhile, as have time guarantee’s for3AA members. But a new additions this time around is the passing mention of Ashley Wood 1:1 editions. Does this mean only members will have access to the (much) larger scale releases Ash has been teasing everyone with the past year? And will 15% off a $3000 (blind est.) toy really make enough price difference for anyone san and normal to afford it? :

F Legion the 3AA exclusive toy

 

The BEST of 3A 2011

ThreeA has had a lot of exciting releases this year with (sadly for my wallet) no signs of slowing down.

This being the tail end of 2011, I thought it’d be prudent to do a round up of my top ten toys from 3A 2011(esque).

This list only includes 3A toys that shipped and are in hand. Some of the items actually dropped in 2010 so this is all based on when we actually got them. As much as I’m anticipating getting my laundry list of preorders in, none are included here.

I’ve heavily fondled every figure mentioned below to deliver the best top ten list possible

10. Zomb 2.1

When Zomb 2 was announced, every 3A collector under the sun did a  backflip for joy. When Zomb 2 was finally shipped, almost that same amount bemoaned it’s many negative perceived differences in appearance between the promo shots shown during their sale and what we all actually got. While the sculpt was cool, the paint on their hands and face was dull and flat, the weathering on the boiler suits was weak and lacked any sort of depth. They seemed to lack the overall polish and care anyone collecting 3A for any amount of time had come to expect.

Almost immediately, Ashley Wood (3A founder, super artist of countless robots, pretty ladies and cats) swooped in bearing epic-customer service guns and said something to the affect of, “these aren’t up to par, we’re sending replacements to everyone for free on our dime.” Just like that, everyones Zomb 2.x collection doubled, like ’em or not, no questions asked.

A few month’s later,  Zomb 2.1 starts hitting doorsteps and they seem to completely live up to what everyone was hoping for to begin with. When held up next to the OG Zomb, you’re still able tell a difference in the quality, but the new kid hold’s his own just fine.

Faith, restored with a single toy.

9. SDCC Exclusive AP Ascended Popbot

I love the design of Popbot. He stands as my favorite Ashley Wood robot just slightly behind Dropcloth. He’s the lynchpin in one of Ash’s most well known universes, so getting the toy right was unmistakably important. If you don’t already know, 3A most certainly did. Popbots are fantastic.

I had to make a difficult call between giving the #9 spot to 1/6 Ascended Pop or 1/12 SDCC Ascended Pop. I have both. I love both. They both look amazing with their grungy white wash paint and side kitty. They’re both a lot of fun to pose and really stand out on display. SDCC Pop comes with TWO pistols while 1/6 comes with only one.. but somehow that makes 1/6s single canon appear more powerful or maybe more important.. so it balances out and doesn’t seem to make much of a difference to me.

In the end it came down to which version I mess with the most and that is un-mistakingly lil’ SDCC Pop. I play with him all the time because he’s perfect desk size, has all the articulation of his larger brother and comes with two guns which make for all sorts of fun configurations.

Ok, maybe the two guns do make a difference.

8. Kid Sarge

Exclusive of the newly designed MK2 Square 10 pack and the only bi-eyed Mk2, Kid Sarge is something all together different. Cigar hanging out his cute face, a plume of smoke puffing off his back and long skirt hiding his long creepy double jointed MK2 legs. Sounds good on paper it does not! The results however are a ton o’ fun.

The MK2’s in general were the surprise hit of the year I think. Most folks were thrown by the omni eye and long spindley legs, a far cry from the familiar and friendly looking squares of old with their stubby legs and a standard pair of optics. Kid Sarge mixed the old with the new and added a bit of twist to even that unholy union. Completely unique on the shelf and one of my favorite releases this year.

7. JC

I’ve spent more time posing my Tracky boss JC than any other 1/6 toy on my shelf. He’s what you get when you combine equal parts Bruce Lee, a wise man, a hobo, and someone born on the mean streets of Sydney. He has my favorite head sculpt of any 3A toy and has the best hand sculpts as well. What more do you need than a fist and a tiger claw to keep things lively? His clothes are forgiving and his articulation is top notch allowing for whatever crazy kung fu pose you can think of.

JC is the Tomorrow King of the Adventure Kartel world, which only makes sense if it makes sense to you.

Side Note: I had standard and Mauro JC for a little bit and loved their hooded robes. In the end, Tracky Boss won me over but I hope we see those robes again in some form in the future.

6. Kyuuketsuki

My anticipation for Kyuuketsuki actually began with the teaser pics of a giant orange bothead covered in Action Portable TK’s. I didn’t know what it was, or how to get it.. but I NEEDED that bothead. I wasn’t 3AA at the time so I was unable to buy the 3AA exclusive Kyu and had to “settle” with Baka. I told (lied) to myself that I’d be happy with him either way, but as soon as the first person posted a picture of Kyu and that massive bothead, I began to haggle and spread the word that I NEEDED that bothead… I mean Kyuuketsuki. It wasn’t long before I tracked him down (and at an amazingly fair price, thanks dude! You know who you are) and he was in my hands.

I’ll be honest here, if you haven’t picked up on it yet.. the bothead was the main selling point for me on Kyu. I still liken him to the sorta “Snake Eyes” of the 3A world. Once posed, he looks really badass but I find him so difficult to balance I rarely mess with him. Coupled with all the grenades draped all over him that fall off like pinecones whenever I bump, I found myself basically setting and forgetting him. But once I got him set up next to that wonderfully ginormous bothead, the pair became quite an impressive site. He makes a fine center piece to anyone’s collection.

5. GRUNTS

When I first heard about Grunts and how they were to be “meat for the machines” I pictured in my head these inexpensive, stripped down, bare bones soldiers that could be had for a song. I dreamed of lacing my shelves with a dozen of them, either meeting some terrible fate to a group of Dropcloths or have them fighting as a squad, taking on a lumbering giant robot hellbent on seeing how many of them it can fit in the cleats of his giant robot foot. Plans of customizing and maiming the few “spares” I was sure to get began to cluster into my mind.

Then the picture started popping up. Pictures of these bulky, completely kitted out super soldier looking dudes who actually looked like they could give a giant robot a run for his money. Oh, and they rung in at almost triple the price I was wanting to pay. I tossed my keyboard against the wall and poured hot coffee on my desktop in a fit of blinding rage. “La passione!” I yelled.* (*ed note: that never happened) Sure, they looked cool.. but my mind was made up and I already knew what the grunts looked like and these guys weren’t it!

Well, fast forward  six months to me opening the first of the pair I ordered (Stealth and Jungler) and I was immediatly hooked. All my doubts went right out the double pane glass, into the street  and promptly hit by the douche that always drove far too fast through my nieghborhood (It’s 30MPH! There’s CHILDREN playing! COME ON!)

The Grunts are all kinds of awesome, zero question there.

4. Wasabi/Oyaloper

I know I probably shouldn’t group these two under one, but I honestly can’t make up my mind between them. They’re both equally great figs.

If this was to name the best PRICED figure of the year, then Wasabi would be near the top of the list. The simplicity of Wasabi with his single sword and optional rocket launcher makes him easy to pick up and play with for a few moments while the coffee’s brewing. He’s also the first member of the highly anticipated “7 Bones” crew, which somehow makes him instantly awesome. On the other hand, Oyaloper is the first Oyabun/Interloper. He has a slick muted cool-grey color palette that’s synonymous with the Interloper. On top of swords and a rocket launcher, he comes with the always awesome Oya coat and a mask/scarf to change up his appearance as you please.

I almost choked on this drop. I was this close to only buying one, but man I’m so glad I didn’t and grabbed them both. They’re two of my personal favorites.

3. MK3 Bertie mode B

The MK3 Bertie’s was probably my favorite drop of all time. I felt like a kid in a very expensive candy store. For starters, there was a ton of color ways to choose from. These guys looked absolutely MASSIVE in the promo pics and they cost upward of $250 a pop. The latter being for obvious reasons, the least exciting part. I was pretty new to 3A and this was my first big bot to order directly from them. I could only get one so I had to make it count. I went with the most bonkers of the group, the MK3 Nightwatch Bertie mode B

There’s something about those huge ridiculous shoulder canons on my NW (a colorway I HIGHLY recommend btw) Bertie, perched high on the top of my shelves looking down over my desk, that makes me pause and smile every time I see them. It’s that impressive of a bot. For something that came out in 2010 to still make that kind of impression in what’s soon to be 2012 really says something.

2. EMGY GRUNT

You might wonder why I have Grunts lumped together and taking up the # 5 spot on the list and now here at # 2  I have EMGY Grunt all by his lonesome. Why should EMGY Grunt get such special treatment you say? Well that’s simple..

He’s way better.

🙂

I won’t go much into my reason’s for putting this guy near the top. I already did that and if you want to know the details you can read ’em here.

The best looking 3A figure of the year.

1. Action Portable Tomorrow Kings

When I talk about “playing” with the various toys I buy and collect, I’m most likely using the word pretty loosely. It usually translates to mean I take them out of their package, set them up with whatever accessories they came with, try posing them  for 10 or 15 minutes and then sitting them on my shelf to collect dust until I decide it’s time to reposition them again.

When I talk about playing with the APTKs, I mean it. Literally. These guy’s are the most fun I’ve had with anything in my collection hands down. When I (carefully) popped open the clam shell my first APTK came in, stood him up and gave him a simple “kung fu” pose on my desk, I had no idea that I’d be posing and reposing him again and again for the next hour. No lie.

I’m in my 30’s and you might hear me say “pew, pew, pew” and “HYAH!” to a six inch action figure at my desk on a regular basis.

I’m giving my number one spot to APTK’s as a whole. The original’s popped the cherry and brought the fun and anticipation for what’s coming. The 3AA membership Oya’s gave us tiny Oya jackets and more little dudes to hunt down and collect. Then the Unleashed Yo/Yellow Hornet 4 packs show up with their combo goofy/rad two punch that is too funny/awesome to be ignored. Finally we have the Hatchery gaurd and his tiny cleavers chopping his way to our shelves.

I collect 3A for several reason’s. The artwork these toys are based on is created by one of my favorite artist. The toy’s themselves are amazingly well done and inspire me creatively. I’m a bit of a nerd with a passion for games, movies, toys, comics and the like. But, the top reason I collect these toy’s is because, if only for a brief moment, they remind me what it’s like to be a kid again.

No toy has done that like these little guys. They’re perfect.

So there it is, Best of 3A 2011. I’d love to hear your thoughts, if you agree, disagree, etc.. Hell make up your own list and post them in the comments section.

I hope everyone has a safe and fantastic New Years! Thanks for reading and we’ll see you in 2012 with more more more!