*Review* 3A WWR EMGY Caesar

This review was suppose to go up right before Comic Con. Unfortunately I ran into a few snags when attempting to use my iPad to post it on the way to San Diego. Apologies!

– Knives


Fact: 3A’s release of the WWR Caesars was one of the/my most anticipated toy releases of the year. I wasted no time grabbing an EMGY when he dropped on Bambaland. I’d would have liked to snagged another color-way as well but what my parents told me when I was a child unfortunately still holds true. “Money does not grow on trees.”

Fact: A few months later, I purchased the awesome looking 003 which came as part of the Father and Son two pack. I was stoked.

Fact: I received my Father and Son two pack in the mail and was absolutely over the moon with excitement to get home and open up the massive box. I smiled at the thought of basking in what was sure to be some bright red form of toy geek nirvana.

Fact: Watching the clock at work because you can’t wait for 5pm to roll around only makes time move slower. Avoid clocks when anxious.

Fact: I finally opened the two pack and was incredibly underwhelmed, let down and saddened when I did. (review here) Good feeling gone. Hope for mankind lost.

Fact: I put off opening my EMGY for over 3 days as the weight of disappointment that close together would surely cause me to burn my collection and by proxy, my house, to the ground.

Fact: The wife would not be pleased by this. I advise to avoid fire under distress.

Fact: I finally opened my EMGY Caesar.

Fact: I smiled.. more than once.

Fact: I’m writing this review at 7:00am in the morning at the top quarter portion of a six hour flight, in a crowded cabin and next to a screaming baby.


A color coded slip cover is the first thing you’ll see when opening up your Caesar. For EMGY, you get some stark yellow design elements and a dash of logos to balance things out.

Slips are nice, but a little boring. Underneath it, we get to the good stuff. A printed image of a super cool Ashley Wood painting. The painting itself features the dome topped Gravedigger. It’d been cool if Ash did a unique piece for each color-way, but being as there were close to 50 different ones (ed note: exaggeration) I can’t fault them for simplifying it.


Obviously, you get a giant yellow (EMGY) bot, along with his huge rifle, side arm and knife. You also get a little catalog of the ghosts of 3A past, aka toys you can’t get anymore less you brave the treacherous after market sea. You also get a pretty awesome WWR comic as part of the deal.

The comic is pretty short, and save for a few select panels and some really nice paintings on the last few pages.. it’s relatively light on exciting content. But it tells a little WWR story which has an actual beginning, middle and end (take that Popbot!). WWR is something many like myself have been asking for more of since Ashley put out the World War Robot collection several years back, and just like so much of what the man does, the result has me clamoring for more.


This is a first for Rad Toy Review. I’m basically reviewing the same exact toy as I did a few weeks back with the 003 from the Father and Son two pack. There are some immediate, obvious contrasts of course, one is red, the other yellow, but at their core, they’re the same thing.

So what’s a fellah to do? How do I write a new perspective to something I JUST wrote? Well, as it happens, the clothes do indeed make the man. On some accounts, the machine.
Emgy might as well be an entirely all new toy as the differences between the two, if only aesthetic, feel truly immense.

Let’s being shall we? I went with the EMGY color-way not out of any particular love for yellow, but because I’m fortunate to have both an EMGY Grunt and EMGY Dropcloth. The three should look smashing together on display. (hint: they do)

The WWR Caesars are all part of 3A’s LUX line. This is intended to mean that, for a price, we get a higher quality, more refined and all around better collectible. My vocal reaction to the claim upon first unleashing 003 to the world was this giant, disappointed “meh”. EMGY on the other hand, holy crab cakes! Look at this sexy beast!

3A did some really good things with the paint job on this big fellah. The layers of weathering we’ve come to expect from them is all here with streaks and smears, sponged dirt and splatters. Take a closer look and you’ll see some of the stuff that calls back to the 3A of yesteryear.

We have silver metal popping out from underneath his yellow coat, edges worn by harsh conditions and the elements. There’s small flecks of red here and there, subtly offsetting the dominate dirty yellow. I haven’t seen toy “metal” look this metal in a long, long time! Say what you will about the design, Caesar is painted up very,very nice.

Big guns. That’s been sort of a theme of late with the big bots I’ve reviewed. Zaku had an absolutely massive beast of a gun and while not quite as huge, Caesar’s isn’t too shabby either. EMGY C is one of the select Caesars to get the newly designed smart rifle. Other’s came packed with the same rifle that previously came with WWR Armstrong’s.

How well designed this new smart rifle is, like so much else in life, is completely objective and probably up to your personal tastes. I think it’s pretty great. It’s heavy, hard edges and bulky barrel look tough. The removable clip, scope and color coordinated bits add some interest. It’s an all new look for WWR and projects as though it’d pack a heavy punch. Something which seems well suited for a Caesar.

Standard issue with all stripes of Caesar is their harmonic knife and trusty side arm. I loved on the knife a bit in my 003 review and I stand by said loving here. The knife is a sick piece of kit. Of course EMGY’s has yellow accents to ensure no one picks it up by mistake and runs off with it.

The side arm looks great as well. Color coordinated and with a trigger guard that actually fits Big C’s fingers. Something that shouldn’t even be review worthy, but as 3A can be pretty dyslexic about whether or not the weapons they give their characters actually fit or not, it seems worth mentioning. It also helps when posing him Solid Snake style with blade and pistol at the ready.

Shields. The EGMY crew has an abundance of them and they are in many ways, synonymous with the color-way. While all the Caesars sport a shoulder shield of some kind, I thought it was fitting they gave EMGY two.

This is where I must address what is basically my only real complaint about Caesar.. EMGY Caesar that is. The weight of the shields on his arms are too much for the balljoints at his shoulders. This could be an isolated thing and I just lucked out with one of whom’s BOTH arms flop around needlessly at his sides. I say that, because I don’t recall having the issue with 003. Maybe he warped some in the heat during shipment or maybe he slipped past 3A’s QC. Whatever the case may be, it sucks to get a new toy and immediately have an issue on your hands. I’ll say this here, 3A’s Customer Service is some of the best out there. They’ve helped me out countless times in the past with all sorts of little issues ranging from scuffed paint to broken weapons. Even replaced things I broke myself! But to fix this, I’d have to ship Big C back to them. That’s not cheap nor is it something I want to deal with.

Instead, I went for a bottle of super glue and slowly built up a fine layer around the joint until I got it tight enough to hold the poses I needed him to.

Speaking of pose. You can get quite a bit out of the big guy. He’s the most articulated bot out right now from 3A. His size does inhibit how spryly you’ll be able to move him around, but with some patience and little work you can squeeze a ton out of him.

The skirt draped around EMGY will be familiar to anyone who’s owned a dropcloth. All the pros and cons of the waist high moo moo are included as well. The biggest negative being the bags, sheath and holster are all held on by little cloth tabs tucked into it’s waist band. More likely than not, the second you take your Caesar out of his package a few of them will already be untucked and the bags will be hanging loosely. I miss the good ol’ days when bags had loops on the back and a belt strung through them to keep them solidly in place.
I’ve been dealing with this small annoyance since day one of collecting 3A. I’ve learned to accept it, but it still irks me the slightest bit. A little tip: If you pull your straps through and get enough slack you can simply tie them together for sound keeping.


Night and day. Red and yellow. That’s how different the 003 and EMGY Caesars are. 003 was a mountain of plastic disappointment, looking cheaper than it should have and frankly, dull. My EMGY Caesar however, is the bee’s knees. The killer paint app, the double shields, the tough flat head, the newly designed smart rifle, a harmonic knife and the ample articulation make for a really fun and impressive bot.

I want to pose this guy.. move his arms around into exciting poses with that awesome canon/rifle/broomstick. Get him sneaking up behind a grunt with blade drawn for the kill. Lots of cool, exciting and fun ideas pop up just looking at this guy sitting here.

There in lies the rub. I know I’ll probably never bother.
Once he’s set up on my shelf, he’ll most likely stay exactly however he sits from now until I absolutely HAVE to move him. The fun of grabbing a toy to mess around with during a moment of downtime isn’t really an option. He’s just too big and cumbersome to easily toss around. A crowded shelf of carefully placed toys doesn’t help.

It shouldn’t matter to me. I’m technically a grown up.

EMGY Caesar is awesome. Figures like this are why I collect 3A. Loose shoulder joints aside, I’m completely satisfied with how they produced this guy. I guess what I’m starting to see with my own collection is that I just don’t NEED any more big bots. They become permanent fixtures and eat up a ton of space.

So even though I have this new toy that I want to kiss and hug and call George, it’s probably the last 1/6 scale giant robot that I’ll be adding to my collection.

Of course giant robots are what got me into 3A in the first place.

Giant robots are cool.

Like really, REALLY cool…

Sigh… I have no will power.




  • Fantastic attention to detail from paint/weathering to articulation and accessories
  • All new bits and pieces head to toe
  • Epic big bot with great articulation. High kicks galore!
  • Huge shields, huge gun, huge bot = huge awesome
  • EMGY looks baller when paired up with his crew


  • Shields are heavy and may cause issues when posing the arms
  • 3A still uses little tucked straps which fail to keep bags/sheaths/holsters tight and where they’re supposed to be. The 14th century called and wants their buckle-less straps back!















4 thoughts on “*Review* 3A WWR EMGY Caesar

  1. So much envy for you and your EMGY collection. Great photos and an even better review. I’ve got to say though, I’ve a hard time believing you when you say that this might be your last 1/6 WWR figure simply because there could/should be more EMGY iterations. How could you pass one up? The EMGY is by far my favorite colorway and in my opinion are in their own distinct class of 3A.

    Again though, great review. It’s aided me to cope with my inability to cop any EMGY figures thus far. So, thanks.


    • You have a point.. I never said I wouldn’t be tempted.. or even that I may not give in.. though I did skip the EMGY Armstrong… When the Dropcloths 1.5s come out you can bet I’ll be grabbing a couple..


  2. Great review, and fantastic photos! As owner of one myself, I have to agree that EMGY Caesar is indeed a BEAST!! Instant classic. I also have the loose shoulder joints problem, but it’s not too bad. The arms stay up long enough to get a few good poses in before they start slouching. Cheers…. looking forward to the next rad toy review!


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s